8
PRECAUTIONS FOR SAFE OPERATION
This unit must be plugged into a dedicated circuit protected by branch circuit breaker.
Use a dedicated power source as indicated on the rating label attached to the unit.
A
multiple-tap may cause fire resulting from abnormal heating.
Connect the power supply plug to the power source firmly after removing the dust on the plug.
A dusty plug or improper insertion may cause a heat or ignition.
Never store corrosive substances such as acid or alkali in this unit if the container cannot be
sealed.
These may cause corrosion of inner components or electric parts.
At the recovery from the power failure, check the unit starts the operation properly.
Also
check there is no change on the setting.
When moving the unit, contact our sales representative or agent.
The moving by a user may
cause damage or injury resulting from tipping over of the unit.
Do not use a brush, an acid, a thinner, a laundry soap, a powder detergent, boiling water for
cleaning.
These cause damage of painted surface or failure of plastic and rubber components.
Prepare a safety check sheet when you request any repair or maintenance for the safety of
service personnel.
Copy the “Safety check sheet” and hand it to a service personnel after filling the
sheet.
Our company guarantees the product under certain warranty conditions.
Our company in no
way shall be responsible for any loss of content or damage of content.
CAUTION