Phason Three Ventilation Stage Control, Руководство пользователя

Страница: 8 / 52

TVS user manual Phason
Getting started
Congratulations on the purchase of your new TVS environment control! This manual has been prepared
to help you get the utmost in satisfaction from your TVS. It contains detailed information regarding the
installation and operation of the control. The Getting Started section will step you through the installation
and configuration of your TVS. The following steps refer to other sections of this user's guide for
additional information. Therefore, it is not necessary to read the entire document from front to back, but
rather in the order that the information is needed.
CHECKING RATINGS OF EQUIPMENT STEP
1
•
•
Read the TVS ELECTRICAL RATINGS on page 4.
Fill in the EQUIPMENT LIST on page 5.
WARNING: The equipment to be connected to the TVS control must
not draw more current than the TVS stages are rated for. Use of
equipment that is rated higher than the TVS will result in damage
to the control and will void the warranty.
INSTALLATION
STEP
2
•
Follow the instructions in Appendix A for installing and wiring the
TVS and equipment. Be sure to read the General Warnings section
in Appendix A before installation.
TESTING
STEP
3
•
Follow the instructions in Appendix B for testing the operation of
the equipment installed to ensure that it is connected properly.
2 2009-09-15