Phason Three Ventilation Stage Control, Руководство пользователя

Страница: 13 / 52

Phason TVS user manual
Definition of terms
NORMAL OPERATION The TVS is in normal operation when it is displaying room temperature.
When alarms occur, the display will alternately flash the alarm signal and
room temperature.
PROGRAMS
Programs consist of the Main, Differential, General and Setup parameters.
The TVS has seven programs that can be selected and reprogrammed by the
user.
OPERATING PROGRAM The TVS operates according to the parameters in the operating program. Any
one of the seven programs may be selected as the operating program.
PARAMETER LIST
The parameter list is shown on page 19, and is printed on the front of the
TVS control. It is a list of all the parameters that may be programmed by the
user.
PARAMETERS
Parameters are the individual settings that may be programmed. Read the
PARAMETER DESCRIPTIONS section on page 16 for an explanation of
each parameter. There are four categories of parameters:
1) Main: Main parameters control the main operation of the control.
2) Differential: These parameters are programmable differentials. They
are the number of degrees above or below the temperature set point
the particular stage starts or turns on.
3) General: General parameters are common to all programs. These
parameters can have only one setting which is the same in all
programs.
4) Setup: Setup parameters control the overall operation of the unit.
These parameters can have only one setting which is the same in all
programs.
10245506 7