Phason
34440600
B.
Shut down AutoFlex Connect II
If you can access the menus at the control or from a web browser, start at step 1. If
you cannot access the menus, start at step 3.
1.
On the Diagnostics screen, swipe right or left until you see the Shut Down Display icon.
2.
Press
Shut Down Display
.
The control goes through a shutdown process. When the message “
It is now safe to turn off the
control.”
displays, you can go to the next step.
3.
Open the cover of the control.
4.
Switch off or disconnect the power to the control.
5.
Wait for the red light on the controller board to go off. This can take from 3 to 5 minutes.
C.
Verify the database backup
If you successfully completed section A, skip this section and go to section D.
1.
Loosen the three screws that secure the cover and then open the cover.
2.
Remove the USB drive that DOES NOT have the WARNING label.
3.
Plug the USB drive into a USB port on a computer.
4.
Find the
Backups
folder on the USB drive. The
folder should have all the backups that have been
saved. The file names include the date of the
backup.
5.
Save a copy of the most recent valid backup to your
computer. The file size must be greater than 0.
i.
Right-click the latest backup and then select
Copy
.
ii.
Right-click the folder on your computer where you would like to save the file and then
select
Paste
. A copy of your backup should now be in the folder you selected.
NOTE:
If you do not have a valid backup, you will need to reprogram the control after replacing
the display. Skip to section D.
Not a valid backup.
File size must be larger, like the other ones.
