Phason AutoFlex Connect II, Руководство пользователя

Страница: 1 / 4

Phason 34440600
AutoFlex Connect II display kit
This procedure explains how to install AutoFlex Connect II
display kit (model
KAFXC2-DISPLAY)
. Follow the steps in the order
they are listed.
A.
Create a new database backup
B.
Shut down AutoFlex Connect
C.
Verify the database backup
D.
Remove the old display
E.
Install the new display
F.
Power on and test the system
A. Create a new database backup

If your AutoFlex Connect II is not functioning, skip to section B.

Create the backup on the
new
USB drive that
DOES NOT
have the WARNING label.

Your control might look different than the pictures in the examples but the
procedure is the same.
1. At the control, press the main menu and then
Administration
.
2. On the Admin Panel, press
Diagnostics
.
3. Press
Eject USB
and then press
Yes
. Follow
the instructions on the screen. If a message
displays that it is safe to remove the USB
drive,
DO NOT press Okay
.
4. Loosen the three screws that secure the cover
and then open the cover.
5. Remove the USB drive that
DOES NOT
have the WARNING label.
6. On the new display, remove the USB drive that
DOES NOT
have the WARNING label.
7. Plug the new USB drive into the port where you removed the old USB drive from in step 4.
8. Press
Okay
.
9. Swipe to the right or left until you see the Backup Database icon.
10. Press
Backup Database
.
11. Press
Yes
and then wait for the backup to complete.
12. Eject the USB drive as you did in step 3.
13. Remove the USB drive.
14. Plug the old USB drive into the port and then press
Okay
.
REMOVE
DO NOT
REMOVE