Phase Research 2000 Series Drive-Thru Timer System 2+2/386, Руководство пользователя, Страница: 88 / 131

SECTION 13 - PARAMETERS PROGRAMMING 13-20
PHASE RESEARCH
USER GUIDE
SECTION 13 - PARAMETERS
13-1.8 Set Remote Display Options
THIS FEATURE REQUIRES AN ACCESS CODE FOR ENTRY
The Set Remote Display Options screen lets you select the information that appears on the
Remote Displays.
From STORE PARAMETERS Screen (see “PARAMETERS PROGRAMMING” on
page 13-1):
1. Press to select [REMOTE DISP OPTIONS].
2. Press . You are now in the Set Remote Display Options screen.
NOTE: A Timer may have up to six Remote Displays (one standard plus up to five
optional). The first five show two types of data: 1) the elapsed time for the
event assigned to the Display, continuously updated during the event; and,
2) the average time for the event computed over the daypart, shift, day, week,
month, or year to date (as selected by the user), after the car leaves the station.
The average time is re-computed after each car leaves the event assigned to
the Display, and is shown by flashing numerals once the event station is no
longer occupied.
3. Press to move the cursor to the desired Remote(s).
1 1 : 0 0 A M M O N F E B 2 3
R E M O T E D I S P L A Y
R E M O T E # 1 A L I N E
R E M O T E # 2 A W I N 1
R E M O T E # 3 A W I N 2
R E M O T E # 4 A W I N 1
R E M O T E # 5
R E M O T E 8 3 % A W I N 1
F L A S H A V G D A Y P A R T
< A R R O W S > T O M O V E
< + O R - > T O S E L E C T
< M A I N M E N U > T O E X I T