manualshive.com logo in svg

Pharmacia Biotech 18-1016-85, Руководство пользователя

Поделиться
Скачать
Pharmacia Biotech 18-1016-85 Скачать руководство пользователя страница 76

9. Multiphor II application kits and accessories

This kit is used for casting agarose gels on a 84x94 mm glass plate or
GelBond film for immunoelectrophoresis or immunodiffusion. Templates are
included for the following techniques

• Grabar & Williams immunoelectrophoresis
• Laurell rocket and fused rocket immunoelectrophoresis
• Crossed and tandem crossed immunoelectrophoresis 
• Intermediate gel in fused and crossed immunoelectrophoresis
• Double-Diffusion (Ouchterlony)

Sample wells are punched in a pattern depending on the technique being
performed. Gel punchers are available with outer diameters of 4.0, 2.5 and
2.0 mm, corresponding to 10, 5 and 2 µl sample volumes.

Note:  GelBond film is recommended for all one-dimensional 

immunoelectrophoretic techniques and as the second dimension in 
crossed immunoelectrophoresis. However, for ease of handling the 
gel in two dimensional techniques, the gel for the first dimension 
should always be cast on a glass plate.

Kit contents - Code No. 18-1016-87

Designation

Code No.

Glass Plate, 84x94x1 mm (50/pkg)

80-1106-69

Plate Holder

18-1019-92

Template, Laurell and fused rocket

80-1109-60

Template, Grabar & Williams

80-1109-61

Template, crossed and tandem crossed

80-1109-62

Template, double and counter diffusion

80-1109-63

Gel Puncher, 2.0 mm

80-1109-69

Gel Puncher, 2.5 mm

80-1109-70

Gel Puncher, 4.0 mm

80-1109-71

Levelling Set

18-1018-88

69

9.4 Immuno-

electro-
phoresis Kit

9401-119 finns ej inscannad

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание 18-1016-85



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды