Off position
: Button will have red glow. All outputs are now off.
3
rd
Touch-
Off state is now reached by touching button briefly after Ignition output is activated.
Start position
: Button will have violet glow. Starter output will be activated.
Starter solenoid will be supplied with +12v for three seconds; or until engine run is determined. In
addition to Start output being activated, Ignition output will also be activated, or stay active depending
on the “active state” of Touch n Go.
Place foot on brake and touch anytime-
Briefly touch button, there is no need to hold finger on button.
Touch n Go will automatically start the engine. Starter and Ignition outputs are now activated. Button
will have violet glow while engine is cranking. Once engine run is detected, the starter output will
automatically be turned off. Ignition output will stay on and Accessory output will be turned on
simultaneously.
If engine needs more than three seconds provided for automatic starting, the user can
choose to hold finger on Touch n Go button for an extended period of time. This will allow the starter
to
crank for as long as needed.
*Please note, the user will then have to remove finger once engine
starts to prevent starter from staying engaged while running.*
