Thank you for purchasing state-of-the-art electronics from Phantom Products. We hope you enjoy
Touch n Go as much as we have.
Please keep in mind that it is the responsibility of the purchaser / installer to determine if this system is
right for the intended application. It is also the responsibility of the purchaser / installer to observe
proper and safe installation procedures. For example; using the proper gauge of wires to make
connections, and installing a neutral safety switch between Touch n Go unit and Starter. Touch n Go
was designed for the easiest possible installation, but it is still recommended that you consult a
professional for assistance.
Please read and understand manual completely before using or installing your Touch n Go ignition
replacement system.
Button Function
You will notice icons in this section that resemble a keyed ignition. These are a representation of the
equivalent key position or function state Touch n Go is in.
Off position
: Button will glow red in two different ways. A rapid flash, followed
by a one second pause, means that security is active and Touch n Go is disabled. Touch n Go will not
respond to touch input. This is because the security system (security optioned units only) has not
