GSPublisherVersion 241.1.7.100
4
2 O'Clock
Position
230°
PANEL CONNECTION AND FASTENING
Det. 1
Det. 2
Det. 3
I
II
III
IV
I -
Insert the Minifix (1), Dufix (1) and wooden dowels (2) in the shown positions.
Gently knock in the wooden dowels using a rubber mallet where necessary.
II -
Confirm that the Minifix orientation is as shown in Det. 1 then connect the
panels.
III -
Using a screw driver, turn the Minifix 230° clockwise to fasten the panels
together. Refer to Det. 2.
IV -
See Det. 3 for Minifix orientation when fastened. Reset the Minifix
orientation to that shown in Det.1 to disconnect the panels.
1. Confirm that all panels (5) are in the package before assembling.
2. Check the white sticker on each panel for the labelling (A - E).
3. Ensure that the panels are laid on a non-abrasive surface when
assembling.
4. Note that all panel connections are done using the system described
below unless otherwise stated.
GENERAL INSTRUCTIONS
