GSPublisherVersion 241.1.7.100
DRAWER BOX ASSEMBLY 2
DL - Left Box Side (2)
DF - Drawer Box Sub Front (2)
DP - Drawer Box Bottom (2)
DR - Right Box Side (2)
DB - Drawer Box Back (2)
15
NUMBER OF PANELS: 10
1. Confirm that all panels (10) are in the package before assembling.
2. Check the white sticker on each panel for the labelling (DF(2), DL(2), DR(2), DB(2) & DP(2)).
3. Ensure that the panels are laid on a non-abrasive surface when assembling.
4. Note that all panel connections are done using the system described below.
GENERAL INSTRUCTIONS
2 O'Clock
Position
230°
PANEL CONNECTION AND FASTENING
Det. 1
Det. 2
Det. 3
I
II
III
IV
I -
Insert the Minifix (2) and Dufix (2) in the shown positions.
II -
Confirm that the Minifix orientation is as shown in Det. 1 then connect the
panels.
III -
Using a screw driver, turn the Minifix 230° clockwise to fasten the panels
together. Refer to Det. 2.
IV -
See Det. 3 for Minifix orientation when fastened. Reset the Minifix
orientation to that shown in Det.1 to disconnect the panels.
