PFT 00631891 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 56

PFT 00631891 Скачать руководство пользователя страница 33

Safety – Setting up and commissioning – Operation – Spare parts lists

Speed preselection for milling cutter, sawing and groove sawing power unit

2021-03-22

33

Main switch

To be able to switch off the machine quickly in an emergency situation, there is

a yellow and red MAIN SWITCH (emergency stop switch) on the side of the control

panel; this immediately de-energises the machine.

To start-up the machine again after actuating the main switch, the red switch must

be turned to position 1. This is possible only when the machine is plugged in.

Danger!

For each power unit or tool change, the main switch must be turned off to

prevent a potentially dangerous start-up of the devices

.

24.2 Operation longitudinal and cross-cut axes – position displays

The 2 position displays (Y and X axis) are used for precise adjustment of the cutting dimensions.
The dimension is shown in cm.

Cross-cut axis (Y) display

Longitudinal axis (X) display

C” key: for resetting the display (possible at any position)
The arrow keys are only required for programming.
LED X lit: The display shows the current counter status.
LED P lit: Preset value is displayed. (Function is locked!)
LEDs X and P lit: Scaling factor is displayed. (Function locked!)
This applies to both displays!!

«
...
31
32
33
34
35
...
»

Содержание 00631891

























































Отзывы:

Нет отзывов