Safety – Setting up and commissioning – Operation – Spare parts lists
Basic safety instructions
2021-03-22
11
4.4 Basic safety measures for normal operation
During operation of the machine, no safety devices may be removed or disconnected.
Before each use, the operating personnel must make sure there are no unauthorised
people within the working area by the machine.
Danger!
After switching off the machine, wait for all moving parts to stop before reaching into
the danger zone.
At least once a day and before each use, perform the following checks:
Check the machine for external damage.
Check the function of all safety devices.
4.5 Basic safety measures during maintenance
The maintenance work stipulated in the operating manual – adjustment, cleaning,
lubrication, maintenance, inspection, etc. must be carried out on time.
Observe the special information for the individual components in these operating
instructions and in the supplied component manufacturers’ guides.
Before carrying out maintenance work
, the following points must be observed:
Use the main switch to switch off the central power supply; lock the main switch and
unplug the mains plug.
Immediately replace any machine parts that are not in good working order.
Use only original spare parts or spare parts of the same type.
After completing the maintenance work
and before starting up the machine,
observe the following points:
Check all previously disconnected connections.
Make sure that all previously removed protective devices and covers, etc. are
installed again correctly.
Make sure that all the tools, materials and other equipment used in the work area
have been removed.
Clean the work area.
Make sure that all safety devices of the machine are again working correctly