PFM Medical Slide 4004 M Скачать руководство пользователя страница 21

Страница: 21 / 26

pfm Slide 4004 M Rev.2022-03-28

Part 5 – Maintenance, cleaning, care and disposal

5.1 Maintenance

In order to guarantee the sectioning quality and operation

of the slide microtome, annual routine maintenance should

be carried out by a trained service technician. pfm medical

ag provides maintenance to ensure that your instrument

Remove the microtome knife/microtome blade holder

before cleaning. It is recommended that the microtome be

cleaned by the user depending on the degree of dirt

contamination and frequency of operation. Mild household

cleaning agents can be used. Do not use any aggressive

cleaning agents or solvents as these could damage paint and

plastic parts. Do not allow liquids to penetrate the inside

of the instrument. The cross roller guides are protected

against dirt and do not need to be cleaned. The floor cover

of the microtome is removable. To do this, remove the four

rubber feet. Any possible residual paraffin can then be

removed without difficulty.

always remains in perfect condition. Details can be obtained

from your sales representative or directly from pfm medical

ag.

WARNING

Caution! When handling disinfectants and

cleaning agents, always follow the manufacturer’s

instructions regarding safety, dilution and

exposure time.

5.2 Cleaning and care

Maintenance, cleaning, care and disposal

5.3 Returning the microtome for repair or maintenance

Repairs and maintenance work are usually carried out on

site. If this is not possible for any particular reason, the

instrument can be sent to pfm medical ag. Before you send

an instrument to pfmmedical for a service, it must be

suitably cleaned and decontaminated. This also applies to

instruments undergoing a service on site. Contaminated

instruments pose a potential health hazard for anyone

coming into contact with them due to infectious agents,

pathogens or medicinal products. The legal requirements

for the handling of contaminated equipment are specified

in various regulations, including the Occupational Safety

and Health Act (ArbSchG), the Biological Agents Ordinance

(BioStoffV), the Occupational Safety Act (ASiG) and the

Accident Prevention Regulations (UVV). To confirm that the

instrument has been decontaminated, please complete the

decontamination certificate carefully. You can find the

current certificate on our website:

http://www.pfmmedical.com/downloads.

Servicing can only be carried out if a certificate is fully

completed in advance and enclosed with the instrument.

If it is found that the instrument poses a potential hazard,

we reserve the right to return the instrument to the sender

immediately at the sender’s expense.

WARNING

Caution! Always send the instrument in the

original packaging. Please contact pfmmedical if

you no longer have the original packaging.

Caution! Knives/blade holders should always

be packed in the appropriate box. For the blade

holder, ensure that the knife/microtome blade

has been removed beforehand.

Содержание Slide 4004 M



























Результаты поиска

Содержание Slide 4004 M

Отзывы:

Бренды по названию

Популярные бренды

PFM Medical Slide 4004 M, Руководство по эксплуатации

Результаты поиска

Содержание Slide 4004 M

Отзывы:

Бренды по названию

Популярные бренды