manualshive.com logo in svg

PFM Medical Slide 4004 M, Руководство по эксплуатации

Поделиться
Скачать
PFM Medical Slide 4004 M Скачать руководство пользователя страница 11

11

pfm Slide 4004 M Rev.2022-03-28

Operating instructions

3.2 Assembling the accessories

Object orientation clamping lever

Object orientation adjustment screws

Orientable adapter

1
2
3

3

1

2

Adapter orientable

Assembling the object clamps with/without adapter

Universal cassette clamp, 

orientable

Universal cassette clamp, non-

orientable (without adapter)

▸

  Release and remove the object orientation clamping lever.

▸

  Turn the two adjustment screws for object orientation to the tangible zero-point (marked in red).

▸

  Insert the object clamp with the adapter, paying attention to the position of the hole so that the clamping lever can  

later be inserted without difficulty.

▸

  Clamp the object clamp using the clamping lever.

▸

  After each change, check that the clamping lever is sufficiently clamped.

NOTE

Some object clamps are optionally also available as a non-orientable version. For use on the instrument, the object  

clamp must be attached to the adapter fixed or adapter orientable. It is then fitted to the instrument as described.

Содержание Slide 4004 M



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды