Revision: 3.0.3
1.3
Powering on
As soon as the Flowmeter is switched on, the
error code will display on the screen (Refe
automatically according to the last input para
If the installation is accomplished when syste
After S1, S2, S3, S4 are displayed on the uppe
measurement condition automatically. It is ind
If it is the first time to use or install on a new
The system will default to the last window se
1.4
Keypad Functions
This keypad is dual function keypad:
1. When separately pressed, is shortcut
referring to "2. Quickly set menu instructions
2. Press
and Number key, is M
referring to"6.Menu Window Description".
Follow these guidelines when using the F
keypad (Refer to Keypad Figure):
~
And
To input numbers.
Backspace or delete characters to the le
And
Return to the last menu o
the next menu. Acts as "+" and "-" functi
entering numbers.
1.5
Keypad Operation
The flow meter adopts the window software
instrument setup and measurement result di
input parameters, modify settings or display
are arranged by 2-digit serial numbers (includ
number, or so-called window ID code, has a
input for pipe outside diameter, while Windo
(Refer
–
Windows Display Explanations).
The keypad shortcut to visit a specific windo
ID code. For example, to input or check the
ID code 11.
Another method to visit a particular window
the current window ID code is M02, press
Window M00; then, press the
key to
M02.
Windows are separated into three types: (1)
Pure Display Type, such as M01, M00.
You can check the corresponding paramete
parameters, input the digits and press
Menu
0
9
●
<
^
^
^
Enter
D116 Series Ultrason
on, the self-diagnosis program will start to run. If any erro
efer - Error Diagnoses). After that self-diagnosis, the
parameters.
stem is switched on, gain adjustment can be monitored i
he upper left corner of the screen, the system will acti
indicated by code "*R" on the upper left corner of the s
new site, the customer need to input the new installation
settings and automatically display them at next power o
cut function,
ons ";
Menu key,
Flowmeter
he left.
or to open
unctions when
Select a menu. Press this key
menu numbers and then enter the selec
example, to input a pipe outside diam
keys, where "11" is the
display the parameter for pipe outside d
are design to consolidate or subdivide all of the parame
displays into more than 100 independent windows. T
ay measurement results by "visiting" a specific window.
ncluding "+" sign) from 00~99, then to +0, +1, etc. Each
a defined meaning. For example, Window M11 indicat
ndow M25 indicates the mounting spacing between the
s).
ndow is to press the
key at any time, then input the 2
he pipe outside diameter, just press the
k
ndow is to press
and
keys to scroll the screen.
key to enter Window M01, press the
button
to back Window M01, and press the
key again to
(1) Data Type, such as M11, M12; (2) Option Type, such
eters by visiting the Data Type Windows. If you wan
or press
first, input the digits then press
aga
Menu
1
1
Menu
Menu
1
1
^
^
^
^
^
Enter
Enter
sonic Flowmeter
Page 9 of 53
rror is detected, an
he system will run
ed in Window M01.
activate the normal
he screen.
on site parameters.
r on.
y first, input two
selected menu. For
ameter, press
he window ID to
de diameter.
meters entered, the
. The operator can
w. These windows
ach window serial
cates the parameter
he transducers, etc.
the 2-digit window
keys for window
een. For example, if
tton again to enter
n to enter Window
pe, such as M14; (3)
ant to modify the
again to confirm.
Menu
