ENGLISH
ENGLISH
12
DRAIN BODY INSTALLATION
9
10
11
9 HANDLE ADAPTER ATTACHMENT
Thread the Handle Adapters (
9A
) over the Valve Stems (
9B
) and tighten so that the Handle
Adapters (
9A
) sit on top of the Putty Plate (
9C
) or Putty Rings (
9D
).
10 HANDLE INSTALLATION
Connect Handles (
10A
) onto
Handle Adapters (
10B
).
Be sure Valves and Levers are in
the “OFF” position. Secure handles by holding the Lever (
10C
) in place and tighten the
Hubs (
10D
) by rotating them in a clockwise direction. To remove handles, rotate Hubs
(
10D
) in a counterclockwise direction.
11 WATER SUPPLY CONNECTIONS
Connect water Supply Lines (
11A
) to Faucet Inlets (
11B
). Hot water supply lines go into
left inlet. Cold water supply lines go into right inlet. (
Supply lines not included
). Please
follow manufacturer’s instructions when installing supply lines.
12 POP-UP INSTALLATION
Install and adjust Pop-Up (
12A
) using separate instructions supplied with the Pop-Up
assembly.
4
HOT
COLD
9A
9A
9B
9B
9D
9B
9D
9C
10A
10A
10B
10C
10D
10B
11B
11A
11A
11B
12A
