ENGLISH
ENGLISH
6
7
8
INSTALLATION WITHOUT DECK PLATE
6 MOUNTING RINGS INSTALLATION
(
For installation using the deck plate, go to step 4.
)
If desired, place a small bead of plumber’s putty to the underside of Mounting Rings (
6A
).
Place Mounting Rings (
6A
) onto Sink Holes (
6B
).
7 SPOUT INSTALLATION
Insert Lift Rod (
7A
) into hole at top of Spout Head (
7B
).
Insert Spout Shank (
7C
) through
Spout Gasket (
7D
) and Center Sink Hole (
7E
). From underneath sink, place Thrust
Washer (
7F
) onto Spout Shank (
7C
) and tighten with Mounting Nut (
7G
). Before final
tightening, be sure Spout (
7H
) is centered and facing forward.
Caution:
Do not over tighten!
8 UNDERBODY INSTALLATION
From underneath, insert Underbody (
8A
) through end holes (
8B
), with shank labeled with
Red Tag (
8C
) on left side. Align Socket (
8D
) onto Spout Shank (
8E
), push Underbody
(
8A
) up until the top of Socket (
8D
) reaches the Spout Shank Stop (
8E
). Be careful not to
damage the O-Ring Seal (
8F
).
Place Clip (
8G
) into Spout Shank Grove (
8H
) to secure unit.
3
6A
6A
6A
6B
6B
6B
7A
7B
7C
7D
7E
7F
7G
7H
8A
8F
8F
8C
8C
8D
8G
8G
8H
8G
8E
8E
8D
8E
8A
8B
8B
8B
8B
