Installation
10
Fig. 3: Pumping station rear view
4.3 Function
The pumping station is intended for evacuating vacuum chambers to pressure values in
the medium vacuum range.
5 Installation
5.1 Installation location
Observe the following requirements when setting up the pumping station:
• Consider the load-bearing capacity of the installation site.
• Maximum installation altitude 2000 m (above mean sea level)
• Permissible ambient temperature: +12 ... 40°C
• Maximum relative humidity 85%
The installation location is to be chosen so that pumping station components are freely
accessible for inspection and servicing.
– Note set-up conditions for the individual components.
Always place the pumping station on a firm, even surface.
Protect pumping station against air draughts and direct atmospheric exposure.
5.2 Preparatory work
Before installing and commissioning the system, the installation location must be
equipped.
1
2nd Gas outlet
2
2nd OME 40 M
3
2nd DUO 65 M
3
2
1
