Pfeiffer Vacuum OKTA 8000 G ATEX, Руководство по эксплуатации

Страница: 3 / 56

Table of contents
1 About this manual 7
1.1 Validity 7
1.1.1 Applicable documents 7
1.1.2 Product variants affected 7
1.2 Target group 7
1.3 Conventions 8
1.3.1 Instructions in the text 8
1.3.2 Pictographs 8
1.3.3 Stickers on the product 8
1.3.4 Abbreviations 9
2 Safety 10
2.1 General safety instructions 10
2.2 Safety instructions 10
2.3 Safety precautions 13
2.4 Product usage limits 14
2.5 Proper use 14
2.6 Foreseeable improper use 14
3 Product description 16
3.1 Function 16
3.2 Product identification 17
3.3 Product features 18
3.4 Shipment 18
4 Transportation and Storage 19
4.1 Transporting the vacuum pump 19
4.2 Storing the vacuum pump 20
5 Installation 21
5.1 Installing the vacuum pump 21
5.2 Filling with lubricant 21
5.3 Filling with sealing oil 22
5.4 Fill the sealing medium for the axial face seal 23
5.5 Connecting the vacuum side 24
5.6 Connecting the fore-vacuum side 25
5.7 Connecting the gas cooler 25
5.8 Connecting the cooling water supply 26
5.9 Establishing mains connection 28
5.9.1 Connecting a three phase motor with 6-pin terminal board 29
5.9.2 Checking the direction of rotation 30
5.9.3 Connecting the PTC thermistor temperature sensor (3TF) 30
5.10 Connecting accessories 31
5.10.1Connecting sealing gas 32
5.10.2Installing temperature monitoring 32
5.10.3Installing a protective strainer 33
6 Operation 34
6.1 Putting the vacuum pump into operation 34
6.2 Switching on the vacuum pump 34
6.3 Adjusting the sealing gas amount 35
6.4 Flushing the suction chamber 36
6.5 Switching off and venting 36
6.6 Re-start (to) 37
7 Maintenance 38
7.1 Maintenance information 38
Table of contents
3/56