Page 9
Operating Instructions
AS700 PRESSURE SEALER
6.2.2 Fold Plate 2
Raise the top cover to gain
access to the fold plate. Loosen
the knob and adjust the stop so
that the pointer aligns with the
measurement of the 2nd. fold
(
the knob and close the cover.
6.2.3 Using the No-Fold Guide
If a single fold is being used, the green no-fold guide must be inserted into fold
2. Remove the green no-fold guide
from its stored position and insert it into
the gap shown until the lip contacts the
lower edge of the fold plate. Note its
orientation.
1. Raise the top cover.
3. Close the top cover. The machine
is now set up for single fold.
When single fold is no
longer required, remember
to replace the guide in its
stored position.
Issue 1 Apr 2002
