Operating Instructions
AS700 PRESSURE SEALER
Page 6
SECTION 4
CONTROL PANEL
Machine map
Calibration
button
Zero reset
button
Display
Hand feed
button
Jog button
Run button
Stop button
Button/Item Description
Button/Item
Function
Machine map:
Indicates the position of a paper jam, and also
highlights the paper path.
Calibration button:
Calibrates a form for doubles detection and
places it into the tray in the top cover.
Zero reset button:
Sets the forms count on the display to zero.
Display:
Indicates forms count and error codes (see
Section 10 for error code look-up table).
Hand feed button:
Allows operator to insert pre-folded forms for
seal only. Waits for 30 seconds for input.
Jog button:
Operates machine in short 'spurts' to help clear
forms from the paper path.
Run Button:
Starts machine operating.
Stop button:
Stops machine operating. Press once to stop at
the end of the current cycle. Press again to shut
down the machine.
Issue 1 Apr 2002
