Pfannenberg DTI 6201C, Руководство по эксплуатации

Страница: 62 / 86

Operating Manual DTS and DTI 6201C / 6301C Multi-Controller (MC) 086100014 © Pfannenberg GmbH Page 19 / 43
GB
3.4.4 DTI cooling unit assembly (installation)
Item Designation Item Designation
1 Air inlet 2 Air outlet
3 Device contour
Make cut-outs for the DTI cooling unit
Requirements
- All general requirements have been fulfilled; see General assembly requirements
- The unit is de-energized.
Required tools and material
- Saw
- Use a switch cabinet cutter, if applicable
- Protective covers
Procedure

Use a protective cover to protect the switch cabinet from chips.

Provide the switch cabinet with cut-outs. For the prescribed dimensions, refer to the figure switch cabinet
exterior view.

The four corner cut-outs can be rectangular or have a maximum R = 4 mm.

Deburr the cut edges.

Remove chips and assembly waste from the switch cabinet.

Cut-outs have been made.
Figure 12 - Switch cabinet exterior view
DTI cooling unit cut-outs
1
2
3