Pfaff selectline страница 48 Скачать руководство пользователя

Страница: 48 / 52

3:4

Maintenance and tr

ouble-shooting

The machine skips stitches

The needle is not properly inserted.

Push needle fully upwards,

at side

facing the back.

The wrong needle is inserted.

Use a needle system 130/705 H.

Needle is bent or blunt.

Insert a new needle.

Machine is not properly threaded.

Check how machine is threaded.

Needle is too small for thread.

Use a larger needle.

Needle thread breaks

See reasons above.

See above.

Thread tension is too tight.

Adjust thread tension.

Thread is poor or has slubs in it, or has

become dry after too-long storage.

Only use good threads.

Thread is too thick.

Use needle with large eye (System 130 N).

Needle breaks off

Needle is not pushed fully in.

Insert new needle and push fully in.

Needle is bent.

Insert new needle.

Needle is too thick or too thin.

Insert new needle.

Needle is bent, and has hit the needle plate

because you are pulling or pushing the

fabric.

Let the machine feed the fabric.

Only guide the fabric lightly.

The bobbin case is not properly installed.

When you insert the bobbin case, push

it fully into the stop.

Seam is sewn unevenly

The tension needs adjusting.

Check needle thread tension.

Thread is too thick, slubbed or hard.

Only use perfect threads.

The bobbin thread is unevenly wound.

Do not wind thread free-hand, but run

it on through the winding tension.

Thread bunching at top or bottom side of

fabric.

Thread up correctly. Check needle

thread tension.

Trouble-shooting

Содержание selectline




















































Результаты поиска

Содержание selectline

Отзывы:

Похожие инструкции для selectline

Бренды по названию

Популярные бренды

Pfaff selectline, Руководство пользователя

Результаты поиска

Содержание selectline

Отзывы:

Похожие инструкции для selectline

Бренды по названию

Популярные бренды