Pfaff quilt ambition 2.0 Скачать руководство пользователя

Страница: 43 / 48

Maintenance

Troubleshooting

,QWKLVWURXEOHVKRRWLQJJXLGH\RXZLOOÀQGVROXWLRQVWRWKHSUREOHPV\RXPD\KDYHZLWK\RXUPDFKLQH

For further information please contact your local authorized PFAFF

dealer.

Problem/cause

Remedy

General problems

Bobbin alarm does not work?

Clean lint from bobbin area.

Fabric does not move?

Make sure that the feed dogs are not lowered.

Wrong stitch, irregular or narrow stitch?

Deactivate twin needle or stitch width safety in the

settings menu.

The needle breaks?

Insert needle correctly, see page 21.
Attach correct needle for the fabric.

The machine will not sew?

Check that all plugs are securely plugged into the

machine and into the wall socket.
Push bobbin winder lever to sewing position.

The sewing machine function buttons do not

respond to touch?

The sockets and function buttons on the machine can

be sensitive to static electricity. If the buttons do not

respond to touch, turn the machine OFF and then

ON again. If the problem persists, contact your local

authorized PFAFF

dealer.

Icons on the screen are not activated when

touched?

Calibrate the screen. Calibrate is found in the settings

menu.

The machine skips stitches

Did you insert the needle properly?

Insert needle correctly, see page 21.

Did you insert a wrong needle?

Use needle system 130/750 H.

Is the needle bent or blunt?

Insert a new needle.

Did you thread the machine properly?

Check how the machine is threaded.

Is the correct presser foot used?

Attach correct presser foot.

Is the needle too small for the thread?

Make sure the needle is correct for the thread and

fabric.

Needle thread breaks

Did you insert the needle properly?

Insert needle correctly, see page 21.

Did you insert a wrong needle?

Use needle system 130/750 H.

Is the needle bent or blunt?

Insert a new needle.

Did you thread the machine properly?

Check how the machine is threaded.

Is the needle too small for the thread?

Change the needle to the proper size for the thread.

Are you using poor thread with slubs or thread

which has become dry?

Change to a new higher quality thread purchased

from an authorized PFAFF

dealer.

Is a correct spool cap used?

Attach a spool cap of the right size for the actual

thread spool.

Is the best spool pin position used?

Try a different spool pin position (vertical or

horizontal).

Is the stitch plate hole damaged?

Change the stitch plate.

Содержание quilt ambition 2.0
















































Результаты поиска

Содержание quilt ambition 2.0

Отзывы:

Похожие инструкции для quilt ambition 2.0

Бренды по названию

Популярные бренды

Pfaff quilt ambition 2.0, Руководство пользователя

Результаты поиска

Содержание quilt ambition 2.0

Отзывы:

Похожие инструкции для quilt ambition 2.0

Бренды по названию

Популярные бренды