Pfaff CREATIVE 2124 Скачать руководство пользователя страница 92

Страница: 92 / 97

Maintenance

6:5

When leaving the machine, even for only a short time, switch off the main switch. This is
important if there are any children nearby.

If problems remain contact an authorized Pfaff dealer.

Have your Pfaff creative 2124 serviced regularly by your Pfaff dealer.

Problem/Cause

Remedy

The machine does not feed or feeds
irregularly

Sewing lint has collected between the feed dog teeth
rows

Remove needle plate, remove lint with brush.

Feed dogs are lowered.

Raise feed dogs (see page 2:6).

The machine is running with diffi culty

There are thread remnants in the hook

Remove the threads.

The machine does not sew the selected
stitch

Select the desired stitch again. Switch off the
machine, wait 10 seconds and switch on again.

Window incorrect or blank window

When static electricity is being discharged some
segments of the window may fail.

Switch off the machine on completion of the sewing
operation and then turn it back on again after
approx. 10 seconds. Select the desired stitch again.

Messages in embroidery mode
Error messages

There are seven different error messages that can
apper on your window:

E1 is shown instead of the design number.

E2 is shown instead of the design number.

E3 is shown instead of the design number.

E4 is shown instead of the design number.

E5 is shown instead of the design number.

E6 is shown instead of the design number.

E7 is shown instead of the design number

This type of format is not supported

The card information cannot be red (Corrupt card)

The design is too big for the largest hoop. This
message will be shown when you have chosen a
design.

Corrupt data. This design is larger than the
maximum size for a design. This message can appear
while the machine is embroidering.

No data found. The machine does not fi nd any
designs to embroider.

You need to bring your sewing machine to your
dealer for service.

The design does not fi t in the largest hoop.

Non-original Parts and Accessories

The warranty does not cover any defect or damage caused by use of non-original
accessories or parts.

Содержание CREATIVE 2124


































































































Результаты поиска

Содержание CREATIVE 2124

Отзывы:

Pfaff CREATIVE 2124, Руководство пользователя, Страница: 92 / 97

Результаты поиска

Содержание CREATIVE 2124

Отзывы: