Pfaff CREATIVE 2124 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 97

Pfaff CREATIVE 2124 Скачать руководство пользователя страница 27

Preparations

D

C

Preparations

2:9

Winding a bobbin through the needle

It is possible to wind bobbins even when the
machine is fully threaded.

Raise the presser foot lifter to the top posi-
tion. Pull the needle thread underneath the
presser foot and upward through the right-hand
threader slot.

Place the thread from left to right through the
take-up lever D.

Note

: The take-up lever must be at its highest position.

Guide the thread to the right under thread
guide C.

Place an empty blue bobbin on the bobbin
winder aligning the small rectangular hole on
the bottom side of the bobbin with the small
pin on the bobbin winder, making sure that the
Pfaff logo is facing up.

Wrap the thread tail clockwise around the
bobbin. Push the bobbin-winding lever to the
right. Hold the end of the thread tail fi rmly and
press the foot control. As soon the bobbin is full,
the winding action will be stopped automatically.
Push the bobbin to the left, cut the thread and
remove the bobbin from the winder.

«
...
25
26
27
28
29
...
»

Содержание CREATIVE 2124


































































































Отзывы:

Нет отзывов