Pfaff admire air 5000 Скачать руководство пользователя страница 30

Страница: 30 / 44

30 – SEWING

3–Thread Stretch Overlock

For sewing extra stretchy fabrics. Add additional stretch by using a stretchy type thread in the

lower looper. Change the thread tension accordingly.

Note: Not recommended for heavy weight fabrics.

NORM/

TIGHT

N/R

THREAD TENSION

Both

1.0

2-3

NORM

Yes

1-2

2–Thread Overedge, Wide (and Narrow)

For overcasting a single layer of light to medium weight fabrics (2-thread overlock converter

required).

Note: Use the right needle instead for a narrow stitch. Recommended thread tension settings within

brackets in the chart.

NORM/

TIGHT

N/R

THREAD TENSION

Left

1.0

2~3

NORM

Yes

(–)

–

(0)

–

(–)

(9)

2–Thread Wrapped Overlock, Wide (and Narrow)

Gives a beautiful finish to lightweight fabrics (2-thread overlock converter required).

Note: Use the right needle instead for a narrow stitch. Recommended cut width and thread tension set-

tings within brackets in the chart.

NORM/

TIGHT

N/R

THREAD TENSION

Left

1.0

2~3

NORM

Yes

4~6 (–)

–

(5~7)

–

(–) 1-3 (4~6)

3–Thread Flatlock, Wide (and Narrow)

For sewing fabrics together with a decorative effect either with the flatlock side or the ladder

stitch side. Create varying effects by threading the loopers with decorative thread, such as 40

weight rayon.

Note: Use the right needle instead for a narrow stitch. Recommended thread tension settings within

brackets in the chart.

NORM/

TIGHT

N/R

THREAD TENSION

Left

1.0

3~4

NORM

0-2

(–)

–

(0)

8-9

(3-7)

Содержание admire air 5000












































Результаты поиска

Содержание admire air 5000

Отзывы:

Похожие инструкции для admire air 5000

Бренды по названию

Популярные бренды

Pfaff admire air 5000, Руководство пользователя

Результаты поиска

Содержание admire air 5000

Отзывы:

Похожие инструкции для admire air 5000

Бренды по названию

Популярные бренды