manualshive.com logo in svg

Pfaff 3834-3/11, Инструкция по эксплуатации, Страница: 6 / 48

Поделиться
Скачать
Pfaff 3834-3/11 Скачать руководство пользователя страница 6

6  PFAFF

Encoder adjustment

This work should only be carried out by a qualified technician.

1

Preliminary work

- Plug the 6 channel plug of the encoder into the motor control box.

- Turn master switch on.

2

Setting

The settings on the input panel are as follow:

press 

 -LED off.

INPUT

appears in the display

press 

SERVICE

press 

PARAMETER   618

press 

 - until display is at 700.

PARAMETER   700

press 

Turn the hand wheel slowly in the direction of rotation (at least one turn!) until the point of the

needle is directly above the needle hole.

press 

Switch to sewing mode.

press 

 -LED on.

Operate pedal. The reference position (parameter 700) and the positions needle bottom dead

centre (b.d.c) (702) and needle top dead centre (t.d.c.) (703) have now been set.

Further parameter settings can be carried out in the main menu 

" 6 SERVICE "

, sub function 

" 2

SEW. MOTOR "

 as described above (see also "Menu functions - overview" page 19).

Содержание 3834-3/11

















































Отзывы:

Нет отзывов