Pfaff 3822-2/42, Инструкция по эксплуатации, Страница: 51 / 152

Input
11 - 8
After sewing starts, the following displays and functions are shown on the screen.
●
By pressing Enter the seam section end is defined by stitch counting.
●
By operating the pedal in position "-2", the seam section is ended by pedal operation, see
Chapter 7.02 Pedal.
●
By operating the knee switch, the seam section is ended by knee switch operation, see
Chapter 7.04 Knee switch.
●
After the function has been called up, additional inputs can be made for the seam section
end or incorrect inputs can be corrected, see Chapter 11.01.05 End of seam section
input during seam programming.
Condensed stitches defined during the input of the functions for the end of the
seam section, will be carried out after the seam program input has been
concluded. Up to 30 stitches will be sewn! Danger of injury in the needle area!
●
Set the seam end or program end.
If entering only one seam (only the right or only the left seam) the program end is set in
the desired seam section.
In the same way as the program end, the seam end is set when entering the right and
left seam. The seam end is set in the first seam and the program end in the second
seam.
●
Conclude the input.
●
Conclude the input and change to the input of the basic settings.
●
Conclude the input and change to programmed sewing.