Pfaff 3822-2/42, Инструкция по эксплуатации, Страница: 39 / 152

Sewing
10 - 5
10
.02
Sewing with fixed programs
Fixed programs are stored under the program numbers 1 1
1 1
1 and 2 2
2 2
2.
The fixed programs are used for the quick and easy production of seams with different
amounts of fullness. When sewing with fixed programs, 2 or 3 seam sections are sewn after
each other. With the knee switch it is possible to move to the next section. The fixed
programs are designed as cyclic running programs, i.e. at the end of the last seam section,
the machine moves back to the first seam section. The fullness value can be set for each
seam section, the settings for the stitch placement position and for the needle and sewing
foot positions apply to all sections and can be changed at any time with the corresponding
function..
●
Switch on the machine and select program number "1" or "2", see Chapter 9.07 Selecting
the program number.
Explanation of the displays and functions
Program selection
This opens the menu for entering the program number, see Chapter 9.07 Selecting the
program number.
Seam section
Shows the number of seam sections in the sewing program.
Input mode
Exit the sewing mode and select the input mode.
Fullness
Alters the fullness value, see Chapter 9.08 Inputting fullness .
Seam start
Opens the menu for entering the functions at the beginning of the seam, see Chapter
10.01.01 Entering the seam start and seam end functions in the manual sewing mode.
Seam end
Opens the menu for entering the functions at the end of the seam, see Chapter 10.01.01
Entering the seam start and seam end functions in the manual sewing mode.