Pfaff 3519-4/01, Инструкция по эксплуатации, Страница: 43 / 160

Sewing
43
Target state
Loading table forwards
10
.04
Error messages
If a malfunction occurs, an error code appears on the display. An error message may be
caused by incorrect operation, machine defects, as well as by overload conditions.
(For a description of the error codes see Chapter 14.02 Description of the error codes) .
Errors when connecting outputs
If an error occurs when connecting an output, the output concerned is shown with the desi-
red switching state ( 0) or (I).
In this case ( 0) means the output should be disconnected and (I) means that the output
should be connected.
In the next line the cause leading to the error is displayed.
The target state for maintaining undisturbed operation is shown in brackets.
In the following example the output S5 is to be connected.
Requirement: E4 must be set at ( 1).
Check
●
E4 and eliminate error.
Acknowledge elimination of the error..
●
Loading table
forwards
Workholder bar
raised
Target state
Workholder bar raised