manualshive.com logo in svg

Pfaff 3519-4/01, Инструкция по эксплуатации, Страница: 10 / 160

Поделиться
Скачать
Pfaff 3519-4/01 Скачать руководство пользователя страница 10

Safety

10

1

.06 

Danger

A working area of 

1 

meter is to be kept free both in front of and behind the ma-

chine while it is in operation so that it is always easily accessible.

During sewing do not place hands in the working area of the machine!

Danger of injury from the sewing head needles and loading equipment!

Never leave objects on the table while adjusting the machine settings! 

Objects can become trapped or be slung away! Danger of injury!

Do not look into laser beam either with or without optical equipment!

Danger of injury to the retina from the directed light!

Only operate the machine with covers 

1 

and 

2 

closed!

Danger of injury from moving machine parts!

The emergency-off button 

3 

is used to stop the machine immediately in 

case of emergencies.

Fig. 1 - 01

1

2

3

4

5

Содержание 3519-4/01

































































































































































Отзывы:

Нет отзывов