Pfaff 1243-712/02 Скачать руководство пользователя страница 7

Страница: 7 / 56

Safety

1 - 3

.05

Notes for operating and technical staff

05.01

Operating staff

Operating staff are the persons responsible for setting up, operating and cleaning the

machine and for removing any disturbances in the sewing area.

The operating staff must be sure to observe the following items:

●

always observe the notes on safety in this instruction manual in their work!

●

refrain from any working methods which adversely effect the safety of the machine!

●

avoid wearing loose clothing or jewelry such as necklaces or rings!

●

also make sure that only authorised persons are allowed near the danger area of the

machine

●

immediately report to the user any changes to the machine that may affect its safety!

.05.02

Technical staff

Technical staff are persons who have been trained in electrical engineering, electronics,

pneumatics and mechanical engineering. They are responsible for lubricating, servicing,

repairing and adjusting the machine.

The technical staff must be sure to observe the following items:

●

always observe the notes on safety in this instruction manual in their work!

●

press the on/off switch before carrying out adjustment and repair work, and ensure it

cannot be switched on again unintentionally, or isolate the machine from the power

supply by removing the mains plug!

●

never work on parts or equipment still connected to the power supply! Exceptions to this

are only permissible according to regulations EN 50110;

●

replace all safety covers after carrying out maintenance or repair work and, if applicable,

close the electrical control box again!

Содержание 1243-712/02

























































Результаты поиска

Содержание 1243-712/02

Отзывы:

Похожие инструкции для 1243-712/02

Бренды по названию

Популярные бренды

Pfaff 1243-712/02, Инструкция по эксплуатации

Результаты поиска

Содержание 1243-712/02

Отзывы:

Похожие инструкции для 1243-712/02

Бренды по названию

Популярные бренды