English
39 - 117
3.1.6
Non Contact Voltage NCV
1.
Set the switch to
;
2.
Move the C.A 5231 (NCV detection zone) close to the
potentially live conductor(s) (presence of phase) ;
3.
If a network voltage of 230V is present (Europe model),
the back-lighting lights red, otherwise, it remains off.
3.2 FUNCTIONS OF THE KEYS
The functions of the
,
,
keys can be accessed by
successive short or long presses. Each press is confirmed by
an audible signal.
3.2.1 The key
This key is used to select the type of measurement and the
display mode and to deactivate the automatic switching off of
the device, at start-up, in combination with the switch. A long
press during start-up, while turning the
switch to any
position, deactivates automatic switching off. The
symbol is
not displayed. As default, automatic switching off is activated
and the
symbol is displayed.
Remark : the DC mode is activated as default.
Each press of
this length…
… serves to
short
Change the nature of the
measurement : AC or DC.
Select the continuity test
or diode
test
mode.
3.2.2 The key
This key is used to choose a measurement range manually.
The range defines the maximum measurement span of which
the device is capable.
Remark : the Auto-range mode is activated as default.
