English
38 - 117
3.
Connect the black lead to the COM terminal and the red
lead to « + » ;
4.
Place the contact tips on the terminals of the component ;
The voltage across the terminals of the component is displayed
on screen.
3.1.5
Current measurement using a Clamp-on
Ammeter
1.
Set the switch to
;
2.
Select AC or DC by pressing
. As default, the device
is in AC mode. According to your selection, the screen
displays DC or AC ;
3.
Connect the black lead of the Clamp to the COM terminal
and the red lead of the Clamp to « + » ;
4.
Place the clamp on the conductor to be measured ;
The measured current is displayed on screen ;
Forward direction
1 mV DC/1 A DC or 1 mV
AC/1 A AC clamp
