Pevino PI24S-B, Руководство пользователя

Страница: 18 / 63

18
Shelf installation: According to below instruction drawing to push in the shelf alignment with two sides of
sliding roller following the arrow mark
③
.
To prevent damaging the door gasket, make sure that the door is fully opened when pulling out the shelves.
REVERSING THE DOOR
WARNING:
To avoid accidents during the process of reversing the door, it is recommended that you get assistance. The
glass door is heavy and may break and/or cause injury if dropped.
Depending on to the model and the type of handle your wine cabinet is equipped with, you may have to rotate
the door 180 degrees. Depending on the type of handle your wine cabinet is equipped with, the door may not be
reversible or may require that a left or right opening door be ordered to change the opening side.
Tools you will need (tools not included):
Knife Hex key
Notice! Before working on reversing the door, turn power off. It is strongly advised that you are two
people reversing the door!
1: Open the door. Using a hex key unscrew the upper and lower hinges. Remove the door.
(Figure A and Figure B)
Figure A - Upper hinge Figure B - Lower hinge