Page
18
of 28
Brightwell 400P
–
July 2022 v1
Pevex Stoves - Brightwell 400P
– Installation & Operating Manual
RECOMMENDED FUELS
All fuels should be stored under cover and kept
as dry as possible prior to use.
This appliance
has been tested using seasoned wood logs and
manufactured briquetted smokeless fuel (Ancit-
MSF) for closed appliances, sized between 20g
and 140g. Other fuels are commercially
available and may give similar results. Wood
logs up to 325mm long are suitable. All fuels
should be stored under cover and kept as dry as
possible prior to use.
DO NOT USE
Household Coal or fuels with a
Petro-coke ingredient
as this may cause the grate
to overheat, causing damage and void your
warranty. Reduced outputs will result when fuels of
lower calorific values are used. Never use gasoline
or gasoline type lantern fuel, kerosene, charcoal
lighter fluid or similar liquids to start or freshen up a
fire in this stove
This stove has obtained approval for burning
natural and manufactured smokeless fuels only as
detailed in
WARRANTY on page 26
This approval
does not cover the use of other fuels either alone or
mixed with the recommended fuels listed, nor does
it cover instructions for the use of other fuels.
Keep all such liquid well away from the stove at all
times. Operate the stove only with the fuelling door
closed except for re-fuelling.
TECHNICAL DATA
MANUFACTURED SMOKELESS
FUEL (MSF)
WOOD
Max Output: (kW)
Nominal Output: (kW)
Room
Total
6.5
6.5
4.9
4.9
Room
Total
6.5
6.5
5.0
5.0
Typical refuelling intervals to obtain nominal out-
puts:
MSF
1 hr
WOOD
.85 hr
CO@ 13% oxygen:
0.05%
0.11%
Flue Gas Temperature at nominal output:
270°C
230°C
Gross Weight
Approximate:
80 Kgs
Flue Outlet Diameter:
125mm
Flue Draught:
12 Pa
Efficiency:
81.5 %
84.8%
Log Size:
N/A
325mm
Flue Gas Mass Flow: (g/s)
3.6
3.6
Energy Efficiency Rating:
N/A
A+
Mean C
n
H
m
(at 13 % O
2
) Nmg/m
3
13
109
Mean NOx (at 13 % O
2
) Nmg/m
3
91
92
DIN Plus dust (at 13 % O
2
)s Nmg/m
3
21
25
LIGHTING
Before lighting the stove check with the
installer that the installation work and
commissioning checks described
previously have been carried out correctly
and that the chimney has been swept
clean, is sound and free from any
obstructions. As part of the stoves
commissioning and handover the installer
should demonstrate how to operate the
stove correctly.
LEAVE THE DOOR SLIGHTLY AJAR BY
APPROXIMATERLY 20MM, DURING
THE FIRST FIRING TO PREVENT THE
ROPE FROM STICKING TO THE PAINT
DURING THE CURING PROCESS.
