PEUGEOT PARTNER 2016, Руководство пользователя, Страница: 156 / 260

154
Partner-2-VU_en_Chap08_Aide-rapide_ed02-2016
Changing a bulb
This procedure requires the use of
the spanner supplied with the tools for
changing a wheel. - Move aside the 4 tabs then extract
the bulb holder.
- Remove the faulty bulb by
pressing it lightly while turning it
anticlockwise.
- Change the bulb.
When removing the lamp unit:
-
with tailgate, pull the lamp unit
towards the centre of the vehicle,
- with hinged doors, pull the lamp
unit towards you.
When refitting, take care to
reposition the tabs and the wiring
correctly to avoid trapping the
wiring.
After changing the rear direction
indicator bulb, the reinitialisation time is
above 2 minutes.
Rear lamps
For more information on bulbs, refer to
the "Types of bulb".
1. Brake lamps / sidelamps
Type B
, P21/5W - 21/5W
2. Direction indicators
Type B , PY21W - 21W (amber)
3. Reversing lamps
Type B , P21W - 21W
4. Foglamps
Type B , P21W - 21W
High pressure jet washing
When using this type of washing
on stubborn dirt, do not persist on
the headlamps, the other lamps
and their edges to avoid damaging
their coating and seals.
Chapter 9, "Changing a wheel"
section.
Chapter 3, "Access" section.
- Identify the failed bulb, then open
the rear doors to 180°.
- Remove the two fixing bolts using
the spanner provided.
- Pull the lamp unit from the outside.
- Holding the lamp, disconnect the
electrical connector.