PEUGEOT 3008 HYbrif4, Руководство пользователя

Страница: 173 / 284

PRACTICAL
INFORMA
TION
171
Removing the cartridge
) Stow the black pipe.
) Detach the angled base from the
white pipe.
) Support the compressor vertically.
)
Unscrew the cartridge from the bottom.
) Connect the compressor's electri-
cal connector to the vehicle's 12 V
socket.
) Start the vehicle and let the engine
run.
) Adjust the pressure using the com-
pressor (to in fl ate: switch B in po-
sition "I" ; to de fl ate: switch B in
position "O" and press button C ),
according to the vehicle's tyre pres-
sure label or the accessory's pres-
sure label.
) Remove the kit then stow it.
Beware of discharges of fl uid.
The expiry date of the fl uid is
indicated on the cartridge.
The sealant cartridge is de-
signed for single use; even if only
partly used, it must be replaced.
After use, do not discard the car-
tridge into the environment, take it to
an authorised waste disposal site or
a PEUGEOT dealer.
Do not forget to obtain a new sealant
cartridge, available from PEUGEOT
dealers or from a quali fi ed work-
shop.
Checking tyre pressures/
inflating accessories
You can also use the compressor, with-
out injecting any product, to:
-
check or adjust the pressure of your
tyres,
- in fl ate other accessories (balls, bi-
cycle tyres...).
) Turn the selector A to the
"Air" position.
) Uncoil the black pipe H fully.
) Connect the black pipe to
the valve of the wheel or accessory.
If necessary, fi t one of the adaptors
supplied with the kit fi rst.