PEUGEOT 3008 HYbrif4, Руководство пользователя

Страница: 156 / 284

DRIVING
154
Displays in the instrument panel
Gear lever positions
N. Neutral
R. Reverse
1, 2, 3, 4, 5, 6. Gears in sequential
mode
AUTO. This comes on when the auto-
matic mode is selected. It switches off
on changing to sequential mode.
Moving off
)
Place your foot on the brake
when this warning lamp fl ashes
(e.g.: when starting the hybrid
system).
)
Select position N .
) Select fi rst gear (position M or A )
or reverse (position R ).
) Take your foot off the brake pedal,
then accelerate.
) Release the parking brake unless it
is programmed to automatic mode.
AUTO or R appears in the
instrument panel screen.
N fl ashes in the instrument panel,
accompanied by an audible signal
and a message in the multifunction
screen, if the gear lever is not in position N
on starting.
Foot on brake fl ashes in the instrument
panel, accompanied by an audible signal
and a message in the multifunction screen,
if the brake pedal is not pressed on starting.
There is an audible signal when
reverse gear is engaged.
N appears in the instrument
panel screen.
Sequential mode
) When the vehicle has moved off,
select position M to change to se-
quential mode.
AUTO disappears and the gears
engaged appear in succession in
the instrument panel screen.
The gear change requests are only car-
ried out if the engine speed permits.
It is not necessary to release the accel-
erator during gear changes.
When braking or slowing down, the
gearbox changes down automatically
so that the vehicle picks up in the right
gear.
At very low speed, if reverse
gear is requested, this will only
be taken into account when
the vehicle is immobilised. The Foot
on brake warning lamp may fl ash on
the instrument panel to prompt you
to brake.
At high speed, if reverse gear is re-
quested, the N indicator lamp will
fl ash and the gearbox will change to
neutral automatically. To engage a
gear again, return the lever to posi-
tion A or M .
If you leave the vehicle, place
the lever in position N and
you must switch off the hybrid
system by switching off the ignition
( Ready lamp off).
) Press the brake pedal down fully.
) Start the hybrid system.