Version E User Guide 208 Rally 4 - 22/01/2021
P 17
Attention:
When disassembling the water hose from the engine to the gearbox exchanger, it is possible that the
water flange remains in the hose. It is imperative to replace the gauge in the upper oil plate before
reassembling the hose.
Cooling circuit:
Fill the entire cooling circuit (about 6.5L) then warm up the car without putting the cap on the
degassing tank.
Regularly open the bleed screw on the heating lines to release air from the circuit.
Always have the coolant level above the maximum during the bleeding procedure, add liquid at any
time if necessary.
Continue to warm up the engine until the fan starts (92 °C).
Upper oil plate
Water flange
Coolant bleeding Screw
