PEUGEOT 208 Rally 4 2021, Руководство пользователя

Страница: 36 / 74

Version E User Guide 208 Rally 4 - 22/01/2021
Return to Content Table P 36
8.7. ANTI-ROLL BARS (ARB)
Three anti-roll bars of different diameters are homologated for the front and rear axle since 1 st
January 2021. It is possible to disconnect and remove these bars.
Brown

Gravel Gray

Tarmac Blue

Gravel and Tarmac
8.7.1. Front Anti-roll
FRONT
Reference Stiffness Diameter
904639358A Soft 15 mm
904639388A Medium 18 mm
904639428A Hard 22 mm
8.7.2. Rear Anti-roll
REAR
Reference Stiffness Diameter
1E2664119C Medium 19 mm
1E2664122C Medium 22 mm
1E2664124C Medium 24 mm
8.8. GEOMETRY
8.8.1. Front
The front camber is adjustable by changing the thickness of the camber shims mounted between the
strut and its interface.
The smaller the thickness, the greater the negative camber, the greater the thickness, the less camber
there is.
Caution : Maximal thickness: 8mm.
To reach this value it is recommended to make a complete geometry without any camber or toe
shims to obtain your initial values. These values can vary from car to car and from side to side.
Front camber: 0.3mm spacer changes the camber by 15'
Front toe: ½-rod rev

0.75mm rod length

1,8mm toe at the wheel
Camber / toe repercussion: -30' camber variation at the wheel

+ 2mm toe at the wheel.
For more information, refer to the setups in appendix 15.6 .