92
Driving
Repeat this procedure to reactivate automatic
operation (confirmed by the indicator lamp on the
instrument panel going off).
Emergency braking
In the event of a fault with the brake pedal or
in an exceptional situation (e.g. driver taken ill,
driver under instruction), a continuous pull on the
electric parking brake control lever will brake the
vehicle. Braking continues while the control lever
is pulled, and ceases when the control lever is
released.
The ABS and DSC systems stabilise the vehicle
during emergency braking.
If emergency braking malfunctions, the message
"Parking brake control faulty" will be displayed
on the instrument panel.
If the ABS and DSC systems
malfunction, indicated by lighting
one or both warning lamps on the instrument
panel, the vehicle’s stability is no longer ensured.
In this event, the driver must keep the vehicle
stable by successively pulling and releasing the
control lever, repeating the operation until the
vehicle has stopped.
6-speed manual gearbox
Engaging 5
th
or 6
th
gear
► Move the gear selector fully to the right to
engage 5
th
or 6
th
gear.
Failure to follow this instruction could
cause permanent damage to the gearbox
(inadvertent engagement of 3
rd
or 4
th
gear).
Engaging reverse gear
► Raise the ring under the knob and move the
gear selector to the left, then forwards.
Only engage reverse gear when the
vehicle is stationary with the engine at
idle.
As a safety precaution and to facilitate
starting the engine:
– Always select neutral.
– Press the clutch pedal.
Automatic gearbox (EAT6)
6-speed automatic gearbox which offers a choice
between the comfort of automatic operation or
manual gear changing.
Two driving modes are available:
–
Automatic
operation for electronic
management of the gears by the gearbox.
–
Manual
operation for sequential changing of
the gears by the driver.
Gear selector module
P.
Park
– Vehicle immobilised, parking brake
applied or released.
– Engine starting.
R.
Reverse
– Reversing manoeuvres, vehicle
stationary, engine at idle.
N.
Neutral
– Vehicle immobilised, parking brake
applied.
– Engine starting.
D.
Automatic operation
M. + / -
Manual operation
► To shift up/down through the gears,
push the control backwards/forwards.
Information displayed on
the instrument panel
When a position is selected in the grate with the
gear selector, the corresponding indicator lamp
lights up on the instrument panel.
P.
Park
R.
Reverse
N.
Neutral
D.
Drive (automatic operation)
1...6.
Gear engaged during manual operation
-.
Instruction not processed in manual
operation
Starting the vehicle
► With your foot on the brake pedal,
select position
P
or
N
.
► Start the engine.
If the conditions are not met, you will hear an
audible signal, accompanied by the display of a
message.
► With the engine running, press the brake
pedal.
► Release the parking brake, unless it is
programmed to automatic mode.
► Select position
R
,
D
or
M
.
► Gradually release the brake pedal.
The vehicle moves off immediately.
Содержание 2008
