44
Ease of use and comfort
passengers in the event of sudden braking or
an accident.
The contents of the boot may be thrown
forwards - risk of serious injury!
Heating and Ventilation
Air intake
The air circulating in the passenger compartment
is filtered and originates either from the
exterior, via the grille located at the base of the
windscreen, or from the inside in air recirculation
mode.
Controls
Depending on version, the controls are
accessible in the "
Air conditioning
" touch
screen menu or are grouped together in the
control panel on the centre console.
Air distribution
Rear head restraints
They have two positions:
– A
high position
, for when the seat is in use:
► Pull the head restraint fully up.
– A
low position
, for stowing, when the seat is
not in use:
► Press the lug
A
to release the head
restraint and push it down.
The rear head restraints can be removed.
Removing a head restraint
► Release the backrest using control
1
.
► Tilt the backrest slightly forwards.
► Pull the head restraint fully up.
► Press the lug
A
to release the head restraint
and remove it completely.
Refitting a head restraint
► Insert the head restraint rods into the guides
in the corresponding backrest.
► Push the head restraint fully down.
► Press the lug
A
to release the head restraint
and push it down.
Never drive with passengers seated at
the rear when the head restraints are
removed; the head restraints should be in
place and in the high position.
The head restraint for the centre seat
and those for the outer seats are not
interchangeable.
Folding the backrests
Manoeuvring the backrests should only
be done when the vehicle is stationary.
First steps:
► Lower the head restraints.
► If necessary, move the front seats forward.
► Check that no person or object might
interfere with the folding of the backrests
(clothing, luggage, etc.).
► Check that the seat belts are free, not
engaged in the buckles. Release them so that
the backrest can be moved.
► Press the backrest release grip
1
.
► Guide the backrest
2
down to the horizontal
position.
When the backrest is released, the red
indicator in the release grip is visible.
Repositioning the backrests
First check that the outer seat belts are
lying vertically flat alongside the backrest
latching rings.
► Put the backrest
2
in the upright position and
push it firmly to latch it home.
► Check that the red indicator is no longer
visible in the release grip
1
.
► Ensure that the outer seat belts were not
trapped during the operation.
Please note: an incorrectly latched
backrest compromises the safety of
Содержание 2008
