manualshive.com logo in svg

Peugeot Motorcycles XR6, Руководство по ремонту

Поделиться
Скачать
Peugeot Motorcycles XR6 Скачать руководство пользователя страница 13

BODY

Page 13

Reproduction or translation, even partial, forbidden without the written consent of Peugeot Motocycles

Removal of the side fairings and the centre fairing

Operation 5

- Remove the hatches (1) of the side fairing 1 screw
on each (stack N°5)
- Remove the 4 screws (2) from the frame ((2A) stack
N° 5, (2B) stack N° 6)
- Remove the 2 screws (3) securing the RH and LH
fairings (stack N°9)
- Remove the 2 screws (5) securing the LH side
fairing and the headlight fairing (stack N°3)
- Remove the 3 screws (4) securing the RH side
fairing to the centre fairing (stack N° 9)
- Remove the LH side and centre fairing assembly

- Remove the 2 screws (5) securing the RH side
fairing and the headlight
- Remove the RH side fairing

Removal of the rear fairing and the number plate
plinth 

Operation 6

- Remove the passenger saddle
- Removing the driver’s saddle (see operation 2 A)
- Disconnect the rear light and the indicator lights
- Remove the 6 screws (1) on the rear fairing; 2 at the
front (stack N°6) and 4 in the saddle housing (stack
N°5)
- Remove the rear fairing (2)

Содержание XR6



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды