SERVICE OPERATIONS
37
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
Checking the overrunning clutch
- Rotate the overrunning clutch by hand:
• It must rotate in direction (A).
• It must be block in direction (B).
- If it doesn't, replace the overrunning clutch.
-
Separate the overrunning clutch from the ring
gear.
- Check the condition of the caged needle
bearing and replace if necessary (1).
- Using your finger, turn the internal bearing
ring; it should turn freely and silently (2).
- Using a brush, clean the overrunning clutch.
- Using your hand, actuate the 3 rollers to
check the condition of release springs (3).
- Check the crimping of the 3 screws (4).
B
A
1
2
3
4
Содержание Citystar 125i
Страница 1: ...Sales division Technical network leadership WORKSHOP MANUAL ...
Страница 2: ......