Petsafe PWW00-14907, Руководство по эксплуатации

Страница: 8 / 16

Customer Care Center 1-800-732-2677 8
Pump Maintenance
Note:
Cleaning the pump is essential to
the longevity of the fountain, as well as the
cleanliness of the water. Clean the pump every
2 weeks. Warranty may be voided if the pump’s
motor is not cleaned regularly.
Rinse all fountain parts with warm water before
operating the pet fountain, including the pump.
Refer to the “Pump Maintenance” section of this
Operating Guide for detailed instructions on how
to properly clean your pump. This will remove
any dust or residue that remain in the system
from the manufacturing process.
1. Once the pump is out of the fountain, with your thumb and
forefinger, gently squeeze on either side of the intake plate
and pull off. It may be necessary to insert a fingernail into
the seam of the intake plate to pry it off. (
Fig. 10)
2. Next, you will want to remove the stator by placing your
finger underneath the small lip, pull it away from the pump.
(
Fig. 11)
3. Once the stator is removed, you can remove the impeller
(3 white-blade propeller). The impeller is held in place
magnetically, simply get a fingernail underneath the plastic
blade and lift out. ( Fig. 12)
4. Once the pump is completely disassembled, you can clean
the parts with warm, soapy water. Use a cotton swab or
bottle brush to get into the pump’s cavity and remove any
build up. ( Fig. 13) For added disinfecting and hard water
removal, clean the pump with white vinegar.
5. Once the parts are clean, you can reassemble the
pump for use.
a. Replace the impeller
b. Replace the stator
c. Replace the intake plate
Impeller
Stator
Intake Plate
Inline
Plug
Pump
Fig. 10
Fig. 11
Fig. 12
Fig. 13