Petsafe PCF-1000-20, Руководство по эксплуатации

Страница: 20 / 124

20 www.petsafe.net
1. Unplug the Fence Transmitter.
2. Connect both ends of your twisted Boundary Wire to one Boundary
Wire Terminal.
3. Measure and cut a Test Wire which is half the length of your total Boundary
Wire footage.
4. Connect one end of Test Wire to the other Boundary Wire Terminal.
5. Locate the halfway point of your boundary and cut the Boundary Wire.
6. Splice the other end of the Test Wire to either side of your Boundary Wire where
you cut it in half.
7. Plug in the Fence Transmitter and check the Loop Indicator Light. If the Loop
Indicator Light is on, you can assume the break is in the other half of the
Boundary Wire.
8. If the Loop Indicator Light did not come on, you may assume there is a break in
this portion of the Boundary Wire. However, there is a small chance of having
Test
Wire
more than one break in your system. Be sure to check both halves of your entire loop.
9. Replace the damaged Boundary Wire with new Boundary Wire.
10. Reconnect the Boundary Wire to the Fence Transmitter.
11. Check the Loop Indicator Light. If the Loop Indicator Light is on, test the system with the Receiver Collar.
__________________________________________________
Terms of Use and Limitation of Liability
1. Terms of Use
Use of this Product is subject to your acceptance without modifi cation of the terms, conditions and notices contained
herein. Use of this Product implies acceptance of all such terms, conditions and notices. If you do not wish to accept these
terms, conditions, and notices, please return the Product, unused, in its original packaging and at your own cost and risk
to the relevant Customer Care Centre together with proof of purchase for a full refund.
2. Proper Use
This Product is designed for use with pets where training is desired. The specifi c temperament or size/weight of your pet
may not be suitable for this Product (please refer to “How the System Works” in this Operating Guide). Radio Systems
®
Corporation recommends that this Product is not used if your pet is aggressive and accepts no liability for determining
suitability in individual cases. If you are unsure whether this Product is appropriate for your pet, please consult your
veterinarian or certifi ed trainer prior to use. Proper use includes, without limitation, reviewing the entire Operating Guide
and any specifi c Caution statements.
3. No Unlawful or Prohibited Use
This Product is designed for use with pets only. This pet training device is not intended to harm, injure or provoke. Using
this Product in a way that is not intended could result in violation of Federal, State or local laws.
4. Limitation of Liability
In no event shall Radio Systems Corporation ® or any of its associated companies be liable for (i) any indirect, punitive,
incidental, special or consequential damage and/or (ii) any loss or damages whatsoever arising out of or connected with
the misuse of this Product. The Purchaser assumes all risks and liability from the use of this Product to the fullest extent
permissible by law. For the avoidance of doubt, nothing in this clause 4 shall limit Radio Systems
® Corporation’s liability
for human death or personal injury or fraud or fraudulent misrepresentation.
5. Modifi cation of Terms and Conditions
Radio Systems Corporation
®
reserves the right to change the terms, conditions and notices governing this Product from
time to time. If such changes have been notifi ed to you prior to your use of this Product, they shall be binding on you as if
incorporated herein.