Petsafe PBC00-11216, Руководство по эксплуатации

Страница: 6 / 12

6 Customer Care Center 1-800-732-2677
To Insert and Remove the Battery
1. The PetSafe
®
Outdoor Bark Control utilizes a replaceable 9-volt battery (not included).
The battery door is located on the back of the unit. Pull the battery door open.
2. Insert the 9-volt battery with the positive side oriented as shown.
Replace the battery door by positioning the top edge, and snap the bottom of battery door
into place.
Lift Battery Door
Replace
Battery Door
Top End First
Battery Life
Average battery life is 2 months, depending on how often the dog barks. To conserve
battery life, turn to the “OFF” position when the Outdoor Bark Control is not in use.
Do not attempt to cut into or pry open the battery. Be sure to discard the
used battery properly.
Two Color LED
The two color LED indicator shows good or low battery. Good battery equals 1 flash every
5 seconds with Green LED. Low battery equals 3 flashes every 5 seconds with the Red
LED. If there are no LED lights it is time to change the battery. When emitting the ultrasonic
sound, the Red LED is solid. When in test mode, the Red LED will flash if battery is low.
Modes of Operation
:
Begin use of the Outdoor Bark Control on the Low Range setting and only increase to
the Medium Range setting if the dog does not respond.
:
If the dog does not respond to the Medium Range, increase to High Range.
:
Turn to the TEST Mode to verify that your Outdoor Bark Control is working properly. Do
not use this Mode for normal operation. See “To Test the Outdoor Bark Control.”